Skip to main content

Does Your Home Need to Have Aluminum Rewiring?

Aluminum Rewiring

Fairfax homeowners usually encounter aluminum wiring when they move into a home that was built during the 1970′s or ’80′s. If your Silver Spring home has aluminum wiring, you should hire a licensed electrical contractor to check the following things:

  • Fixtures (eg: outlets and switches) directly attached to aluminum wiring should be rated for it. The device will be stamped with “Al/Cu” or “CO/ALR”. The latter supersedes the former, but both are safe. These fixtures are somewhat more expensive than the ordinary ones.
  • Wires should be properly connected (at least 3/4 way around the screw in a clockwise direction). Connections should be tight. While repeated tightening of the screws can make the problem worse, during the inspection it would pay off to snug up each connection. Note that aluminum wiring is still often used for the main service entrance cable. It should be inspected.
  • “push-in” terminals are an extreme hazard with aluminum wire. Any connections using push-in terminals should be redone with the proper screw connections immediately.
  • There should be no signs of overheating: darkened connections, melted insulation, or “baked” fixtures. Any such damage should be repaired immediately.
  • Connections between aluminum and copper wire need to be handled specially.
    The NEC requires that the wire be connected together using special crimp devices, with an anti-oxidant grease. The tools and materials for the latter are quite expensive – not practical to do it yourself unless you can rent the tool. [Note that regulations are changing rapidly in this area. Suggest that you discuss any work with an inspector if you’re going to do more than one or two connections.
  • Any non-rated receptacle can be connected to aluminum wiring by means of a short copper “pigtail”. See (5) above.

Don’t panic if your Fairfax or Silver Spring house has aluminum wiring. Aluminum wiring, when properly installed, can be just as safe as copper. Fairfax aluminum wiring is, however, very unforgiving of improper installation. Give S & S Electric, LLC a call today for friendly and reliable aluminum rewiring or installation services.

Need Emergency Electric Repair Services? Our Electricians Are Available 24/7!

Reasons to Have Your Aluminum Wiring Replaced

Aluminum Wire Replacement

Whatever the case may be, having your home up to date and safe should be a number one priority for you and your family. Aluminum Wire Repair is simply not something that can be left undone, and everyday you continue to have allow aluminum wires to distribute your electricity, is another day you risk your home and your families safety.

S & S Electric, LLC van
Intro Background

Recent Aluminum Rewiring Articles

  • Benefits To Replacing Your Old Aluminum Wiring With Copper

    Aluminum wiring in homes has a fairly interesting and slightly controversial history. We have a good number of customers ask us whether their old aluminum wiring is safe, and if it should be replaced. While the simple answer is yes, your old aluminum wiring is safe […]

Second Banner Image

If you're in need of Aluminum Rewiring for your home or office, please call us at 888-922-9473

Or Fill Out Our Quick Form!